Navpod Grand Prix Series For Raymarine Units

Features on all NavPods:

• Watertight Silicone Seal - Keeps rain and spray off electrical connections on the back of electronics.
• Tamperproof - Special fasteners and wrench are included that provide security and convenience to leave electronics onboard.
• Concealed Wiring - No loose wires are exposed to corrosion and UV damage.
• Clean Installation - The Clean look of flush mounting. Mount your display where you can best see and reach it.
• Mounting Hardware Included for Housings - Gaskets, Drill, Tap and S.S. Screws

Grand Prix Series NavPods feature:

• New Industrial Design with Style Enhancements - Built to complement the latest marine electronic products
• Double Seal for Improved Watertight Integrity - Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability with frequent opening and closing
• Polished Stainless Steel TamperPruf Fasteners
• Increased size and strength
• New buttonhead style screws have deeper wrench recesses for better tightening power
• UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners
• Longer 6” Tamperpruf wrench for easier assembly

• New Industrial Design with Style Enhancements
• Double Seal for Improved Watertight Integrity
• Polished Stainless Steel TamperPruf Fasteners
• 20/40 Base - 20 degrees tilt for on-dash mounting, 40 degrees for overhead mounting
• Super Strong Swivel Tube
• Extra Large Swivel Washer

Raymarine Grand Prix Series for Chartplotters/Radars:
	Part Number	Description	Dimemsions (WxHxD)	List Price
	GP1031	PRECUT FOR RAYMARINE C120W (9.5" wide pedestal guard)	N/A	$362.82
	GP1041	Pre-cut for Raymarine 6" C70 and one ST60	20.25" x 9.5" x 6.125"	$272.12
	GP1051	Pre-cut for Raymarine 8" C80	15.125" x 13" x 6.125"	$313.35
	GP1052	PRECUT FOR RAYMARINE C90W (9.5" wide pedestal guard)	N/A	$313.35
	GP1061	Pre-cut for Raymarine 12" C120	16.75" x 13" x 6.5"	$362.82
	GP1071	NAVPOD GP1071 PRECUT RAYAMRINE C80/E80 & 2 ST60'S	NA	$379.32
	GP1173	PRECUT FOR C120W OFFSET TO RIGHT (9.5" wide pedestal guard)	N/A	$395.81
	GP1171	Pre-Cut for Raymarine C80 and 4 ST60's)	N/A	$395.81
	GP2031	Pre-cut for Raymarine C120W (12" wide pedestal guard)	N/A	$362.82
	GP2051	Pre-cut for Raymarine 8" C80 (12" wide pedestal guard)	N/A	$313.35
	GP2052	PRECUT FOR RAYMARINE C90W (12" wide pedestal guard)	N/A	$313.35
	GP2061	Pre-cut for Raymarine 12" C120 (12" wide pedestal guard)	N/A	$362.82
	GP2071	NAVPOD GP2071 PRECUT RAYMARINE C80/E80 & TWO ST60'S	N/A	$379.32
	GP2171	Pre-cut for Raymarine C80 and 4 ST60's (12" wide pedestal guard)	N/A	$395.81
	GP2173	PRECUT FOR C120W OFFSET TO RIGHT (12" wide pedestal guard)	N/A	$395.81
Raymarine Grand Prix Series Power Pod Navpods:
	Part Number	Description	Dimemsions (WxHxD)	List Price
	PP4301	Pre-Cut for Raymarine ST70 Flush. Versitile 20/40 Swivel Base	6.75" X 8" X 6")	$222.64
	PP4302	Pre-Cut for Raymarine ST70 Flush.	6.75" X 8" X 6")	$222.64
	PP5031	Pre-Cut for Raymarine C120W. 20 Degrees for on dash mounting.	N/A	$379.32
	PP5051	PowerPod, Pre-cut for Raymarine 8" C80 : On Dash Mount	15.125" x 13" x 10"	$329.84
	PP5051X	PowerPod, Pre-cut for Raymarine 8" C80 : Overhead Mount	N/A	$329.84
	PP5052	Pre-Cut for Raymarine C90W. 20 Degrees for on dash mounting.	N/A	$329.84
	PP5061	PowerPod, Pre-cut for Raymarine 12" C120 : On Dash Mount	16.625" x 15.125" x 11.25"	$379.32
	PP5061X	PowerPod, Pre-cut for Raymarine 12" C120 : Overhead Mount	N/A	$379.32
Raymarine Grand Prix Series for Instrumentation:
	Part Number	Description	Dimemsions (WxHxD)	List Price
	GP131	NAVPOD GP131 PRECUT RAYMARINE ST60'S (3) THREE	na	$214.39
	GP141	Pre-cut for four Raymarine ST60's (9.5" Wide Pedestal Guard)	na	$222.64
	GP231	NAVPOD GP231 PRECUT RAYMARINE ST60'S (3) THREE	15" x 5" x 3.5"	$214.39
	GP241	Pre-cut for four Raymarine ST60's (12" wide pedestal guard)	na	$222.64