A 10-amp multi-stage battery charger with an enclosed terminal block
Designed to be hard wired into your electrical system, the TRUECHARGE 10TB is ideal for batteries from 25 amp-hours to 200 amp-hours. The multi-stage charge is microprocessor-controlled, ripple-free and faster charging than many 15, 20, and 30 amp rated ferroresonant battery chargers.
The accurate delivery of the three-stage charge eliminates the risk of overcharged or boiled batteries. The ripple-free, filtered DC output helps prolong the life of batteries. TRUECHARGE 10TB is also able to recharge completely discharged batteries.
Charges Two Battery Banks Simultaneously
Truecharge 10TB (part 804-0111) is a 10-amp continuous duty charger with enclosed screw terminals for safe, secure AC and DC connection. It features two outputs that are isolated from one another for simultaneous charging of two battery banks. One bank can be used for the engine, while the other can be used to recharge the house bank - or two house bank batteries can be recharged at the same time. Truecharge 10TB is also able to recharge completely discharged batteries (when voltage approaches 0 VDC).
Features:
- 10 amp output
- Microprocessor controlled, multistage charging
- Charges up to two battery banks simultaneously
- Supports charging for flooded or gel lead-acid batteries
- Wide voltage range operation (90 to 135 VAC, 50/60Hz)
- Three settings for temperature compensation
- Automatic 21 day top-up
- Lightweight, compact size
- CSA/NRTLcertified to UL and CSA standards
- One year warranty
Protection Features
- Over-temperature shutdown
- Non-sparking battery connection
- Transformer isolated for safety and to protect against electrolysis
- Reverse polarity protection (internal fuse)
- Short-circuit and surge protection
| Specifications |
|
Model: |
Truecharge 10TB |
|
Part Number: |
804-0111 |
| Electrical Performance |
|
Output Current (bulk charge) |
10 amps continuous duty |
|
Input Voltage Range |
90 - 135 VAC, 50/60 Hz |
|
Output Voltage
Charge (flooded/gel)
Float (flooded/gel) |
(*Normal, Depending on Settings)
14.2 – 14.4 V DC
13.5 – 13.8 V DC |
|
Charger efficiency |
approximately 82% |
|
Recommended battery type |
flooded or gel |
|
Recommended battery size |
12 V lead-acid batteries, 25Ah to 200Ah |
| Mechanical Specifications |
|
AC and DC connection
|
6 position terminal block with No. 8 screws (for ring terminals with max. 0.42" OD) |
|
Battery connections |
2 positive terminals, 1 common negative |
|
Weight |
3.0 lbs./ 1.4 kg. |
|
Dimensions (LxWxH) |
10.75" x 6.5" x 2.75" / 273 x 165 x 70 mm |
|
Regulatory Approval |
CSA/NRTL certified to CSA107.2 and UL1236 |