Xantrex Battery Charger Model Truecharge 20+ :20 Amp Multistage Battery Charger : Part number 804-0220
Charges Three Battery Banks Simultaneously
With an output of 20 amps, Truecharge 20+ is ideal for your deep cycle batteries when recharging from a source between 90-135 VAC at 60 Hz. Truecharge 20+ offers high frequency power conversion, microprocessor control, multi-step charging, wide input voltage range, battery type selector switch, and an extensive array of protection features.
Statpower 20+ Features:
- 20 amp output
- Microprocessor controlled, multistage charging
- Charges up to three battery banks simultaneously
- Independent settings for AGM, flooded or gel lead-acid batteries
- Wide voltage range operation (90–135 VAC, 50/60 Hz)
- Optional remote LED panel to indicate battery and charge status
- Automatic 21 day top-up
- Durable and corrosion resistant chassis
- CSA/NRTL certified to UL and CSA standards
- One year warranty
Protection Features:
- Over-temperature shutdown and overload projection
- Adjustable temperature sensitive charging for optimal battery charging
- Transformer isolated for safety and to protect against electrolysis
- Reverse polarity protection (internal fuses open)
- Short-circuit and surge protection
- Ignition protected
- Equalization mode conditions batteries for longer life
Specifications:
|
Specifications |
|
Model |
Truecharge 20+ |
|
Part Number |
804-0220 |
|
Electrical Specifications |
|
Output Current (bulk charge) |
20 amps continuous duty |
|
Input Voltage Range |
90 - 135 VAC, 50/60 Hz (Truecharge 10i) |
|
Output Voltage
Charge (flooded/gel)
Float (flooded/gel) |
(*Normal, Depending on Settings)
13.8 - 14.8 VDC*
13.1 - 14.2 VDC* |
|
Output voltage equalize |
15.5Vdc @ 5A maximum |
|
Charger efficiency |
approx. 85% |
|
Recommended battery type |
flooded, gel, or AGM |
|
Recommended battery size |
12V deep-cycle batteries: 100Ah to 400Ah |
|
Mechanical Specifications |
|
Battery connections |
Four Output Terminals (3 isolated positives, one negative) |
|
Weight |
5.5 lbs
2.5 kg. |
|
Dimensions (L x W x H) |
15 x 6.5 x 2.75"
390 x 165 x 70 mm |
|
Regulatory Approval |
CSA NRTL approved to CSA 107.2*, UL 458, UL 1236* and UL 1564 *including Ignition Protection Rating and including the Marine Supplement for use on boats. |
|
Protection Specifications |
|
Reverse polarity protection |
separate fuses on each DC output (internal) |
|
Short circuit protection |
Yes (current limit) |
|
Over-temperature protection |
Yes (shutdown) |