Designed to be the heart of your mobile power system, the PROsine 2.0 is the ultimate inverter/charger. It combines a 2000-watt true sine wave inverter and 100-amp multistage battery charger into one compact, light and easy to install unit. Further enhancements include a Battery Temperature Sensor, built-in AC transfer switch, and LCD Control Panel. PROsine 2.0 provides worry-free AC power that can run even your most sensitive loads. Its fast and efficient multistage charging ensures batteries are properly maintained, fully charged and ready to go when you are.

PROsine 2.0 Protection Features:

• Over-temperature shutdown
• Auto overload protection
• AC backfeed
• Short-circuit protection
• Low voltage

• True Sine Wave Output (<2%THD):
  A smooth, step-free waveform delivering dependable and reliable electrical power for even the most demanding and sensitive of loads.
• Super-Quick Transfer:
  A typical detect and transfer time of 16 milliseconds ensures critical loads stay powered up when AC power drops away or fails.
• Multistage Charger with Built-in Charge Formulas:
  Can be set for any of 21 lead-acid battery types and delivers 100 amps of charging current for quick, accurate battery charging. Plus you can custom configure the charging to meet the unique needs of your new or specialized batteries.
• Power Factor Corrected:
  Allows operation from smaller generators as the full 100 amps of charging current requires only 15 Amps of AC input power (at 120V). It will not draw excessive power and trip breakers in order to provide a 100-amp charge. It is able to maintain a 100-amp charge rate even with an input voltage as low as 90V.
• Series Stackable:
  As your power needs grow, you can connect two PROsine 2.0 inverter/chargers in series to create a split phase 120/240VAC system. Both of these inverter/chargers can be connected to operate from a single (but larger) battery bank, and will work in tandem to provide 200-amp charging.
• Advanced Power Sharing:
  When charging your batteries, PROsine 2.0 will reduce its current draw (and charge rate) when you operate AC loads to keep within the limits of your AC input breaker rating. The current that is left over is available for charging the batteries. This ensures that your batteries are recharged even if you are running AC equipment at the same time you are charging.
• Dead Battery Charging:
  PROsine 2.0 can recharge extremely depleted batteries, even if the voltage is at or near 0V.
• High Frequency Switching:
  Results in a lighter weight and compact design for ease of installation. Actual product weight - a remarkable 24 lbs. (11 kg)!

• Inverter Function:
  The PROsine 2.0 uses the DC power from a battery to provide up to 2000 watts of continuous AC power, and up to 4500 watts of AC power to start loads such as air conditioners and fridges. The true sine wave output is the same as or better than the waveform supplied by your local electric utility. It will run standard AC electrical equipment exactly the way it was designed to run without adding wear and tear. In meeting the FCC Class B EMI standard, it is likely that PROsine 2.0 will not cause interference problems with other equipment.
• Charger Function:
  The 100-amp multistage charger keeps your batteries in top condition (even when they are not in use), maximizing the life and performance of your batteries. PROsine 2.0 uses microprocessor control and comes preprogrammed with charge cycles for most common name brand AGM, Gel or Lead Acid batteries. With this accurate control, PROsine 2.0 precisely regulates the voltage and current delivered to the battery, bringing the battery to its peak charge quickly, without risk of overcharging. PROsine is also power factor corrected so it doesn't draw excessive power and trip breakers in order to provide a 100-amp charge. It is able to maintain a 100-amp charge rate even with an input voltage as low as 90V. Advanced power sharing features give your AC loads priority over battery charging. Manual equalization lets you recondition lead acid batteries whenever you need to.
• Automatic Transfer Switch:
  The integral 30-amp relay has two functions. When utility AC power fails or is disconnected from the unit, a quick 16 millisecond (typical) transfer takes place and the PROsine 2.0 Inverter/Charger begins delivering AC power to the loads. When utility AC becomes present again, the control circuit waits for 8 seconds, during which time the unit verifies the stability of the AC source and synchronizes the inverter to the AC source for a smooth, seamless transfer back to utility power. Even when the utility AC power is good, the microprocessor inside the PROsine ensure that the inverter will be synchronized with the line to provide a smooth transfer if/when the utility fails. Accessories Included With Package:

  			LCD Display panel The LCD Display Panel lets you configure and control your PROsine 2.0 and monitor the status of both your PROsine 2.0 Inverter/Charger unit and your electrical system. It mounts conveniently into an instrument panel or other a location of your choice and is included with the PROsine 2.0.
  			Battery Temperature Sensor The included Battery Temperature Sensor lets the unit adjust the charge formula in real time according to the actual battery temperature to ensure that batteries are fully, but not overcharged, even when the temperature fluctuates.

  Available In two Models:
  • Hard Wired : 805-2000
  • GFCI : 805-2020